22910 Mount Ephraim Rd. Dickerson, MD. 20842
E-mail us: hydrowells@gmail.com
24 Hour Service - 7 Days a Week
Follow us:

Are you planning to install a well on your property? You would need a well drilling MD company to drill a well to extract water. Well water is both convenient and affordable. Although the amount of water we use in our houses varies, its relevance in our daily lives is undeniable.

Another thing you need to consider is a well-pump. It’s a device that takes water from your underground well and pumps it into your home. Your well pump is responsible for supplying water to your toilets, sinks, and bathrooms, among other things. Imagine even a day where you can’t access any of these amenities.

The common modern residential well pump is an amazing resource that may provide water for many years without maintenance. The majority of wells can go for years without needing to be serviced.

Your well pump can last eight to 15 years with regular well maintenance, while many homeowners claim that their pumps survive much longer, typically 25 to 30 years!

How is your water well-performing? Has it seen better days? If you are facing issues with your water well, it might be time to replace it. But how do you know if it’s at the end of its life? Do you simply need to repair it, or is it time to bid it goodbye? In this article, we will disclose some signs that indicate you need to call a well pump replacement specialist.

  1. Your house starts running out of water

    If your pump breaks down, you'll discover that it can't draw any water out. When you turn on a faucet, a tap, or flush your toilet, no water comes out, it's a sign that the pump isn't working properly. But you should first check a few other things before concluding if there's a problem with the pump. These include

    • The pressure tank, also known as a holding tank, is the storage unit where well water is temporarily held before being delivered to your home as needed. Check if there's any leakage.
    • An electrical panel controls your well pump, usually near the pressure tank. Check whether the circuit breaker is operational.
  2. You notice that faucets and taps are spitting air instead of water

    When you turn on a faucet and notice air bubbles or a hissing sound coming from the pipes, the pump may be unable to pull water up and instead bring in air. Air spitting is caused by faulty pumps and a lack of water.

    One possible explanation is that the water pump was installed higher than the water level in your underground well. As a result, it has a hard time pumping water while also sucking in a good amount of air.

    It's also possible that the pressure tank bladder is leaking. The pressure tank functions by having an air bladder that retains water at a high enough pressure to allow it to flow freely throughout your home's plumbing system.

    If neither of these cases, you should get your pump checked.

  3. The water pressure suddenly drops in the house

    If you notice a considerable drop in your normal water pressure when you turn on the water, it's a sign that your pump is starting to fail and isn't capable of drawing as much water.

    A broken well pump isn't the only thing that might produce low water pressure in the residence. So, how can you be sure it's the pump and not something else?

    Examine the Switch for the Pressure Pump

    The pressure switch regulates the water pressure in the pressure tank, ensuring that it does not drop below a given level or rise over a specific level, also known as cut-out and cut-in pressure.

    You Should Check The Water Softener

    A water softener treats the well water before it enters your home. The goal is to keep hard water stains from appearing on faucets and other fixtures. First, see if the water softener screen is clogged with mineral deposits and sediments, which might prevent water from flowing freely.

  4. Your pump starts pumping sediment and sand in considerable amounts

    Your pump could be to blame if the water is contaminated with dirt, sediments, or silt. Unclean water could indicate that the pump is either overworked or too strong and is sucking any random stuff up from the well, even dirt, and debris.

    There could also be other causes, such as a faulty pump filter allowing debris to enter the pumps. It's also possible that the pump was placed incorrectly or the surface run-off and dirt have combined with well water, resulting in unclean water in the household if the pipe breaks. Even pipes with a high mineral concentration can break down and wash out via your faucets.

  5. Foul smell coming out of taps and faucets

    A rotten egg odor indicates that your well pump is malfunctioning. The odor is usually caused by silt drawn up from the well with the water.

    If you discover an eggy odor, you should inspect your pump immediately. It could also be an indication that your pump is either too big or sits too low in the well.

  6. Spike in energy bills

    When the performance of your well pump begins to deteriorate, it will require more energy to function effectively. It is substantially less efficient, which means it consumes more electricity. If your monthly energy bills start to rise, it's a sign that your well pump needs to be inspected.

Conclusion

A well pump is a necessary component of every home that uses well water. You'll probably face unnecessary water problems without a working pump. It can be difficult to determine when your pump needs to be replaced. The diagnosis, on the other hand, may be easier if you know where to look. Get in touch with Hydrowells for well pump services.