22910 Mount Ephraim Rd. Dickerson, MD. 20842
E-mail us: hydrowells@gmail.com
24 Hour Service - 7 Days a Week
Follow us:

Most water wells can be used for many years without any indicators of future difficulties. By the time you decide on a well inspection, unnecessary damage like wellbore collapse, excessive iron, manganese, or other mineral encrustations can have already occurred.

You can sense something is wrong with your well with obvious signs such as:

  • A sudden change of water taste or color
  • Loss of water pressure
  • Sediment in the water
  • Water that smells bad.

Ignoring these signs could mean more significant repair bills in the future. It's always best to have a professional inspect your well as soon as you notice changes in the well water. How do you know your well needs an inspection?

Sudden Change in the Water Taste of Color

You'd know immediately that there is something wrong with your water when it doesn't taste or smell right. Or you could notice a color change, like brown or red stains in your sink. This could be a sign that there is rust in the water pipes. Drinking such water may lead to potential health issues such as gastrointestinal problems and a weak immune system. The last thing you'd want is to get sick from contaminated water, so make sure you do not ignore the signs.

Loss of Water Pressure

A sudden drop in water pressure could mean a leak somewhere in the water system. This could be caused by a broken pipe or a problem with your well pump. If not fixed immediately, the water pressure will continue to drop, and you might end up with no water.

Follow these DIY steps to fix this issue:

  1. Check all the taps in your home to see if the water pressure is low all around or just in one area.
  2. If it's just one area, then the problem is most likely with that particular fixture. Check if the aerator (the small screen on the faucet) is blocked. If it is, clean it and see if that fixes the issue.
  3. If the pressure is low all around, the problem is most likely with your well pump. You'll need to call a professional to take a look at it.

Consider contacting the water well experts. They will be able to inspect the well constant pressure system and install a new one if required.


If you see sediment or rust, it's a sign that there could be iron and manganese in the water. These minerals are not harmful to your health but can cause staining on your fixtures and clothing. They can also clog your plumbing.

Installing a water filtration system is the best way to remove these minerals from your water. This will help improve your water quality and protect your plumbing from potential damage.

Water that Smells Bad

Foul-smelling water could be due to several reasons like :

  • Bacteria: If your water smells like sewage, it could be contaminated with bacteria. This is a serious issue that needs to be addressed immediately.
  • Sulfur: If your water smells like eggs, it could be due to high sulfur content levels. This is not a health hazard, but it can be quite unpleasant.

Installing a water filtration system with a sulfur removal filter will help to improve the quality of your water and make it more pleasant to drink.

Pooling Water Around Your Well

Pooling around your well is a telltale sign of leakage. This serious issue needs to be addressed immediately as it can contaminate your water supply.

You should also check for cracks or holes in the casing (the outer layer of your well). If you spot any, you'll need to have them repaired as soon as possible.

Spongy or Wet Ground Around Your Well

If the ground is spongy or wet around your well, it's a sign that your well might be leaking. This is because the water in the well is seeping out and making the ground wet.

When this happens, it's important to have your well inspected by a professional. They will be able to determine if there is a problem with your well and fix it so that the water doesn't seep out.

In the meantime, you should avoid using the water from your well until the problem has been fixed. If you use the water, it could make the problem worse and cause further damage to your home's well.

Overflowing Groundwater

Overflowing groundwater could be a sign that there are issues with your well. The water in the well is not being pumped out fast enough, causing the groundwater to overflow. Don't miss calling a professional to look at your well to get around this issue.

Water That Tastes Bad

If you detect thvat your water tastes bad, it could be due to several reasons. It could be due to high levels of minerals in the water or contamination with bacteria like E.coli.

Installing a reverse osmosis system can help remove the minerals from your water and make it taste better. TDS (total dissolved solids) meters can also help you monitor the mineral levels in the water. Make sure to set the TDS level to the recommended level for drinking water.

How Can Professional Well Cleaning Agencies Help?

Professional well water treatment experts understand the signs of a bad well. They can inspect various well aspects, such as:

  • The Well Pump: They will check whether the pump is pumping enough water or not.
  • The Well Tank: They will check whether the tank is cleaned or the cleaning is due.
  • The Well Casing: They will check for cracks or leaks in the casing.
  • The Well Cap: They will check whether the cap is fitted correctly to prevent contaminants from entering the well.
  • The Well Pump House: They will check whether the pump house is clean and free of any debris.

Final Word

Calling a professional to inspect your well could be the right thing to do if you believe there's something wrong with your well. They will be able to determine any problem with your well and fix it so that you can have clean, safe water to drink.