Well Drilling
New water wells for homes, new construction and failing-well replacements — drilled, cased, developed and connected, start to finish.
View Details Home Our Work Blog About FAQs Contact Call (301) 393-7090
Well pump repair is the call nobody plans to make: the tap sputters, the pressure dies, and the house is suddenly dry. We diagnose and repair well pumps across Montgomery, Frederick, Carroll, Howard, Washington and Baltimore counties — submersible pumps down the well, jet pumps in the basement, and everything wired between the pressure switch and the pump itself. We are open 24/7, because a house without water does not care what day it is.
No water does not automatically mean a dead pump, and a dead pump does not automatically mean a big bill. The fault can be a pressure switch, a bad wire splice, a failed pressure tank, or the pump at the end of its life — each with a very different price tag. We diagnose before we replace, tell you what actually failed, and fix that. When a pump does need replacing, we size the new one to the well and the household instead of just matching what came out.
Tell us about your project — we’ll get right back to you.
When a house is dry, the job is speed with a working diagnosis. We check the simple killers first — power to the pump, the pressure switch, the tank — because a fair number of "dead pump" calls are a forty-dollar part. If the pump itself has failed, we pull it with the right equipment, confirm what died and why, and set the replacement properly: correct depth, secure wiring, safety rope, and a clean connection at the pitless adapter.
The "why it died" part matters more than most outfits let on. Pumps rarely just die of old age — they get killed by short cycling from a waterlogged pressure tank, by running dry in a low-yield well, or by sediment chewing the impellers. We fix the cause along with the pump, or the new pump inherits the old pump's death sentence.
Not every pump problem is a dry house. Pressure that slowly weakened, taps that spit air, a pump that seems to run constantly, a power bill creeping up — these are the early symptoms, and catching them early is the difference between a service call and an emergency. Air in the lines can mean the water level is dropping to the pump; constant running can mean a leak, a failing check valve, or a pump losing capacity.
We troubleshoot the whole water system, wellhead to pressure tank, and give you a straight read on what is wearing out and what can wait. If the honest problem is the well itself running short, we will say so and talk through the options — hydrofracking, a deeper pump setting, or storage — rather than selling you a pump that cannot pump water the well does not have.
Well systems fail at the worst times because nobody looks at them until they fail. A periodic check is cheap insurance: pressure switch operation, tank air charge, amp draw on the pump, and the wellhead itself — capped tight, sealed, and safe from surface water. Amp draw alone can reveal a pump grinding toward failure months before the taps go dry.
If you have just bought a house on a well, or cannot remember the last time anyone looked at yours, a well inspection baselines the whole system and puts numbers on the pump, the yield and the water. From there, maintenance is easy to schedule and failures stop being surprises. Call (301) 393-7090 — day or night.
Free, no-obligation estimates across central & western Maryland.
(301) 393-7090From the first look at the property to water proven at your tap, here is exactly how it goes.
We come see the actual situation — the well, the equipment, the water, the ground. What's failing, why, and what the fix really is. No blind quotes over the phone.
You get a free written estimate with a real number and a real plan. It says what's included — drilling, equipment, connection, permits — and it holds unless the scope changes.
The crew shows up with the right equipment and does the job the way we quoted it — drill, frack, pull the pump, set the tank, build the treatment. Anything unexpected, you hear about it immediately, not on the invoice.
We don't call it done until the water proves it: yield checked, pressure steady, system cycled, and testing when the job calls for it. Done means water at your tap — and you saying it's done.
Common questions about well pump repair across central & western Maryland. Don't see yours? Give us a call — we're happy to help.
New water wells for homes, new construction and failing-well replacements — drilled, cased, developed and connected, start to finish.
View Details
High-pressure water injection that opens up the bedrock fractures feeding your well — often the fix for a low-yield or declining well.
View Details
Pressure tanks, switches and constant-pressure systems — installed, repaired and sized right, so the shower stops surging and the pump stops suffering.
View Details
Unused, failed or replaced wells properly sealed to county requirements — protecting your property, the groundwater, and your paperwork.
View Details
Complete well system checks — yield, pump performance, tank, wellhead condition and water quality — documented for home sales or your own peace of mind.
View Details
Vertical geothermal boreholes drilled and looped for ground-source heat pump systems — the drilling side of geothermal, done by a well drilling crew.
View DetailsDrilling, hydrofracking, pumps, pressure tanks, testing, treatment — the rigs and the service trucks belong to the same outfit, so one call covers the whole system.
A house without water is an emergency, and we run the operation that way. Call day or night — phone triage is free, and if it needs a truck, a truck moves.
We look at the actual property, price it in writing, and tell you what is worth doing and what is not — including when hydrofracking beats drilling new. No phone guesses.
Based in Poolesville, working six counties. We know what this region’s fractured rock and limestone valleys do to wells — and we drill and service for it.
No water, weak pressure, a well to drill, water that needs testing or treatment? Call or send the form and we will look at the property with you and hand you a free written estimate — and for a house that is dry right now, we answer 24/7.
Tell us about your project — we’ll get right back to you.